From LED downlights to feature pendants and smart switches, we install indoor lighting that looks great and works flawlessly — tidy cabling, no mess left behind, and proper certification.
Why lighting matters more than you think
Poor lighting makes a room feel smaller, darker and less welcoming. The right lighting scheme makes it feel spacious, warm and properly functional. The problem: most homes use one ceiling light per room, which is either too bright when you're relaxing or too dim when you're working. The solution is layered lighting — ambient (fills the room), task (where you actually work or read), and accent (highlights features) — so you have the right amount of light for whatever you're doing, and you're never wasting electricity lighting empty space.
LED changes everything
LED downlights and spotlights use about 75% less energy than halogen equivalents, generate almost no heat, last 15–25 years (vs 2 years for halogen), and produce warmer, more flattering light. Swapping a kitchen's worth of halogens for LEDs cuts the electricity that lighting uses by around three quarters, which adds up over the 20-year lifespan of the fittings. Plus, you'll stop having to climb a ladder every few months to replace blown bulbs.
What the installation involves
We run new lighting circuits from your consumer unit, thread cables neatly through walls and ceilings (minimising disruption and making-good), fit fire-rated recesses where needed to protect floor insulation, install and test every fitting, and tidy all exposed cabling. For kitchens, bathrooms and outdoor locations we ensure every fitting has the correct IP rating and zone protection. For living areas we can add dimmers and smart switches so you adjust brightness and colour temperature from an app — great for setting the mood or saving more energy at night.
Low-profile downlights: when the ceiling won't play ball
Standard fire-rated downlights need a surprising amount of room above the ceiling — typically 90–110mm of clear depth once you allow for the can and the connector block. That's fine in a modern joisted ceiling and a real problem everywhere else: shallow voids, concrete soffits, insulated ceilings, top-floor rooms where the joists sit tight under the roof, and flats where you simply cannot go up into the space above. The usual outcome is a compromise — surface fittings you didn't want, or a dropped ceiling you didn't budget for.
Low-profile downlights solve it. The driver sits remote from the fitting on a short flying lead, so the part that goes through the ceiling is only around 25–35mm deep. They install into voids that will not take a conventional can, they're still fire-rated and IP-rated for kitchens and bathrooms, and once they're in they look identical to a standard downlight from below. We keep a proper low-profile range on the vans rather than treating it as a special order, so if we open up a ceiling and find there's no depth to work with, we can carry on the same day instead of rescheduling you.
Room-by-room guidance
Kitchen: Downlights over the worktop for task light, plus under-cabinet strips for safety and ambiance. Expect 6–12 spots depending on size. Bathroom: Humidity-rated fittings, usually a central pendant plus mirror lights (essential for shaving or makeup). Bedrooms: Softer ambient light from recesses or pendants, bedside reading lights, and dimmers for relaxation. Lounge: Layered — central recesses for ambient, table lamps for reading, accent lighting on shelves or artwork. Hallways & stairs: Regular spacing of downlights or LED strips for safe navigation.
What the quote depends on, and how long it takes
A single room — six to eight downlights and a control — is a straightforward job; a full-house refresh with multiple rooms, dimmers and app control is a much bigger one. Between the two, the things that move the price are how difficult the cable routing is and whether you want smart controls added. We quote once we have seen the space. We work around your schedule, contain the dust, and the whole job is tested and certified before we leave.
Smart controls and future-proofing
Adding wireless smart switches (zigbee or WiFi-based) lets you control lights from your phone, set routines (lights gradually brighten in the morning, fade at night), or use voice commands. Installation is simple and non-invasive since smart switches sit on top of traditional wiring. It's one of the cheapest ways to future-proof your home and cut energy waste.
